
7
Controlling the stove
When burning wood the stove should be controlled with the airwash control knob at the top of the stove. The
primary air control knob should be set to closed (left) position as wood does not need air from below to burn
effectively.
When burning coal, the stove should be mainly controlled by the primary air intake control knob at the bottom of
the stove. The airwash knob should be opened enough to ensure the glass is clean.
Avoid prolonged periods of slow burning which may cause build up of creosote with certain fuels. Using a flue
temperature gauge similar to the one below can help achieve the optimum temperature for clean combustion.
Weather Conditions
Weather conditions can affect the performance of the stove. Strong winds combined with close buildings or trees
can cause the stove to smoke. Heavy rain may lower the temperature of the flue making it difficult to light or slow to
heat up.
MAINTENANCE
De-ashing
The appliance should be de-ashed at least once every 24 hours depending on fuel type and heating load.
Push and pull the riddling knob at the bottom front left of the stove to clear ash from the burning grate into the
ashpan. It is important that the level of ash in the ash pan is not allowed to build up to where it is touching the grate
or insert bars as this will cause premature wear to the both the grate and bars and cause them to burn out.
Baffle plate
It is important that the baffle plate is removed and cleaned at least once every month.
Glass Cleaning
We recommend that the glass is allowed to cool before using a damp cloth to clean it. Abrasive cleaners should be
avoided as they have a tendency to scrape the glass making it more and more difficult to keep clean. Use of a stove
glass cleaner (available from you retailer) is recommended for stubborn stains.
Door
•
Check that the seal around the door is air tight.
•
Replace rope seal if necessary.