Page 2 of 6
BASIC ASSEMBLY TECHNIQUES
FOR YOUR FURNITURE TO LAST,
CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY.
PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE.
FAILURE TO FOLLOW THE GUIDELINES ABOVE MAY
RESULT IN INJURY AND/OR PROPERTY DAMAGE.
IT IS THE USER'S RESPONSIBILITY TO MAINTAIN THE FURNITURE.
THE SCREWS MAY
LOOSEN OVER TIME AND CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO
SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS CAN LEAD TO COLLAPSE AND CAN
CAUSE SERIOUS INJURY.
Before attaching each of the screws,
make sure that the
smaller lock
washer is between
the larger washer
and the head of the screw.
Some furniture comes with optional
height adjustment knobs
underneath each
leg. Turn this knob
counterclockwise to raise the leg level
or clockwise to lower the leg level.
Finally, make sure all parts are
properly aligned
,
then use the
included
tools
to completely tighten
the
screws. Your furniture is now
ready
for use.
Position each part correctly and insert
all screws into their respective holes.
Then,
hand-tighten
only until 70%
tight. Complete tightening with the
tools will come at a later step.
Store the
tools
for later maintenance.
Tighten the screws again
after two
(2) weeks,
and then at least
once
every six (6) months
after that.
Make sure the furniture rets on a
flat and level surface
with each leg
evenly touchin
g
the ground. Use a
soft blanket or carpet underneath
when turning the piece on its side.
** IMPORTANT **
MUST READ BEFORE ASSEMBLY!
