Mazi INVR-0xA, Руководство пользователя

Страница: 112 / 167

User Manual of INVR-0xA / INVR-0xPOE series NVR
112
2.
Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the Network
Settings menu.
3. Click Apply button to save the settings.
2. Select the Email tab to enter the Email Settings interface.
Figure 9. 19 Email Settings Interface
3.
Configure the following Email settings:
Enable Server Authentication (optional):
Check the checkbox to enable the server authentication feature.
User Name
: The user account of sender’s Email for SMTP server authentication.
Password
: The password of sender’s Email for SMTP server authentication.
SMTP Server:
The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
SMTP Port No.:
The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL (optional):
Check the checkbox to enable SSL if required by the SMTP server.
Sender:
The name of sender.
Sender’s Address:
The Email address of sender.
Select Receivers:
Select the receiver. Up to 3 receivers can be configured.
Receiver:
The name of user to be notified.
Receiver’s Address:
The Email address of user to be notified.
Enable Attached Pictures:
Check the checkbox if you want to send email with attached alarm images. The
interval is the time of two adjacent alarm images. You can also set SMTP port and enable SSL here.
Interval:
The interval refers to the time between two actions of sending attached pictures.
4.
Click
Apply
button to save the Email settings.
5.
You can click
Test
button to test whether the Email settings work. The corresponding Attention message box
will pop up.
Figure 9. 20 Email Testing Attention