4
5
03 How to use
02 Precautions
Please read the precautions thoroughly
for your safety!
•
The usage period of battery is at most
four months to eight months.
(Based on the use of ten times a day)
Exchange the battery at that time.
•
Use 4 alkaline batteries of 1.5v AA.
(Rechargeable batteries unusable)
•
In case of full discharge, it’s possible to open the
door with fingerprint, touch-key and password
with linking 9V alkaline battery to outdoor body
terminal.
•
The digital product is assembled minutely and
complicatedly in the inside.
•
The random dismantlement may be dangerous
besides making the troubles of the product.
•
Consumer’s responsibility in case of random
dismantlement
•
It’s prohibited to clean with water because
water cleaning may disturb an electronic circuit.
•
It’s hoped that a dry towel is used for cleaning
the product.
The response measures
to electric discharge of battery
are as follows
You should not dismantle
randomly the product
Prohibition of water cleaning
DANGEROUS
CAUTIONS
WARNING
1. Password registration method
2. Card registration method
➊
Open the battery cover on the indoor unit of the door lock (the indoor unit) with the door
open, and press the registration button
①
on the left bottom side.
➋
Enter the numbers you want on the number panel of the front unit.
(3-12 digit numbers possible)
➌
When you press”*” a notification sound (sounding”ppiririk”) will be heard and the entry
will be completed.
After password registration, make sure it works
1. When you register passwords for the first time or change them, the door may
be locked by mistake. Make sure to open the front door and carry an
emergency key, card, with you.
2. For the passwords, specify the 3-12 digit number except for “*” and “#”
3. If you enter new passwords, the existing ones will be deleted.
4. When all products are delivered, their passwords are set into
1, 2, 3, 4, 5, 6, 7, 8, 9, 0
5. When you install a product for first time, make sure the user enters the
passwords himself/herself.
For your safety, we recommend you to use all RF-card and Tag that manufacturer
provide with. Entecs confirms that “ISO 14443 Type A”certified RF-card and Tag
to be used with the Digital door locks. We, Entecs, are not responsible with the
cases that customers use other type RF-card and Tag, credit card, Smart card and
Mobile phone.
➊
Open the battery cover on the indoor unit of the door lock (the indoor unit) with the door
open, and press the registration button
②
on the right bottom side.
➋
On the screen, the numbers 1, 2, 3, 7, 8, 9 are lit.
(If transmission module isn’t connected, only 1, 3, 7, 8, 9 are lit)
➌
Press “1” - the numbers are blink on the screen
➍
Hold the card near the reader (continuous registration possible), (Max. 50 cards)
➎
Press the registration button
②
on the indoor unit (the card registration finished).
After card registration, make sure it works.
CAUTION
WARNING
