Mazda Remote Start System MPV, Руководство пользователя

Страница: 6 / 10

Normal Vehicle Functions While Using the Remote Control Start Function
Although the remote control start function starts and runs the vehicle by simulating the vehicle’s ignition key,
there are some normal vehicle functions that do and do not work while the vehicle is running on the remote
control starter. The following is an outline of some of these functions:
• The remote starter will power-up the windshield wipers. It is suggested that you get in the habit of turning
the windshield wipers to the off position so that the wiper blades are not damaged in the event of ice or
heavy snow build-up on the windshield while the car is parked.
•
The power windows are operational from inside the vehicle when started via the remote starter. Again,
please do not leave children or pets in the vehicle while the vehicle is unattended and running on the
remote starter.
•
As described in the last section, the A/C and heater functions will operate while the vehicle is running via
the remote starter. Simply remember to set the A/C or heater controls to the desired position when
parking the vehicle.
•
Although the A/C and heater controls do operate while the vehicle is running on the remote starter, the
rear defroster function will not operate by setting it when parking the vehicle. However, It will operate if
it is physically turned on while the vehicle is running on the remote starter.
•
The radio does not operate while the vehicle is running via the remote starter.
What to Do if the Vehicle Does Not Start
In the unlikely event your parking lights are on but the vehicle is not running, the remote starter attempted to
start the vehicle but failed. There are two options to address this condition:
55555
Normal Vehicle Functions
To engage service/valet mode, turn the ignition key to the ON or Run position, press and hold the brake
pedal and press the START button on the remote control transmitter. The system will beep the horn and
flash the parking lights twice indicating the system is in service/valet mode.
To return the system to its normal operating mode, turn the ignition key to the ON or RUN position, press
and hold the brake pedal and press the START button on the remote control transmitter . The system is now
in its normal operating mode.
Warning: To avoid accidental start up while the vehicle is in for service, be sure to place the system in service
mode yourself to disable the remote start function and then inform the service personnel that your vehicle is
equipped with a remote control start system.