Mazda PROTEGE 5 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 52

background image

Black plate (362,1)

Battery

WARNING

Wash hands after handling the battery and related accessories:

Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the State of California to cause cancer and reproductive harm.

Read the following precautions carefully before using the battery or inspecting

to ensure safe and correct handling:

Always wear eye protection when working near the battery:

Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID
which could cause blindness if splashed into your eyes. Also, hydrogen gas produced
during normal battery operation, could ignite and cause the battery to explode.

Wear eye protection and protective gloves to prevent contact with battery

fluid:

Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets in
eyes, or on the skin or clothing. If this happens, immediately flush your eyes with
water for 15 minutes or wash your skin thoroughly and get medical attention.

Always keep batteries out of the reach of children:

Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin.

Keep flames and sparks away from open battery cells and do not allow metal

tools to contact the positive (

) or negative ( ) terminal of the battery when

working near a battery. Do not allow the positive (

) terminal to contact the vehicle

body:

Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames including
cigarettes and sparks away from open battery cells.

8-32

Maintenance and Care

Owner Maintenance

Mazda5_8CN3-EA-12I_Edition1 Page362
Tuesday, September 4 2012 1:25 PM

Form No.8CN3-EA-12I

«
...
27
28
29
30
31
...
»

Содержание PROTEGE 5





















































Отзывы:

Нет отзывов

Похожие инструкции для PROTEGE 5

Бренд: Calira Страницы: 14

Бренд: Honda Страницы: 73

Бренд: Code 3 Страницы: 8

Бренд: Cadillac Страницы: 518

Бренд: Opel Страницы: 141

Бренд: femkes Страницы: 7

Бренд: Cadillac Страницы: 20

Бренд: GMC Страницы: 120

Бренд: Prime Tech Страницы: 6

Бренд: AEM Страницы: 27

Бренд: Oldsmobile Страницы: 354

Бренд: Toyota Страницы: 165

Бренд: Paccar Страницы: 63

Бренд: Renault Страницы: 198

Бренд: Xingyun Страницы: 74

Бренд: Edelbrock Страницы: 2

TuneBase F8Z442

Бренд: Belkin Страницы: 162

Sprinter Bed System DIY

Бренд: FVC Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды