Mazda MX-30 2020, Руководство пользователя

Страница: 113 / 618

For normal charging, the charging
timer function can be used to charge
automatically from start to finish.
For details on how to use the charging
timer function, refer to Charging
Settings on page 3-26.
Quick charging
When charging is started at a quick
charging station (DC with 50 kW or
higher) the high voltage battery can be
charged from a 20% to 80% battery
charge level in about 36 minutes. The
exact charging time depends on
various conditions at the time of
charging, such as the type of charger,
battery condition, charging patterns, as
well as the battery temperature and
ambient temperature. In cold weather
conditions, both the battery and
ambient temperature will affect the
required charging time and, in certain
situations, this may lead to a significant
increase in the charging time.
WARNING
Always heed the following when
using a quick charger:
Otherwise, it could lead to an
accident.
¾ Do not use a charge lead which
exceeds 30 m (98 ft).
¾ This vehicle is compatible with quick
chargers with charge leads of 30 m
(98 ft) or shorter and which do not
charge other devices or vehicles at
the same time.
How to perform normal charging
1. Shift the selector lever to the P
position.
2. Switch the power switch OFF.
3. Remove the charge lead from the
storage bag.
4. Press the location shown in the
figure to open the charge lid.
5. Open the normal charge port cap.
1. Normal charge port cap
6. Connect the charge plug to the
outlet.
7. Connect the charge connector to
the normal charge port. Charging
starts after connection is
completed.
Make sure to lock all the doors
before leaving the vehicle while
charging.
NOTE
x
When the charging timer is set,
charging does not start even if the
charge connector is connected.
Before Driving
Electric Vehicles
3-20