2
GPS CONNECTOR INSTALLATION
（
US/CANADA only
）
Glove compartment removal
1. Push the glove compartment in the direction of the arrow (1)
and hooks A.
2. Pull the stay damper in the direction of the arrow (2) shown in
the figure and remove the hook B.
3. Pull down the glove compartment in the direction of the arrow
(3).
4. Pull the glove compartment in the direction of the arrow (4) and
remove it while detaching hooks C.
GPS connector installation
1. Disconnect the connector from the unit and connect it to the
connector shown in the figure.
2. Install the glove compartment in the reverse order of removal.
•
If the glove compartment is closed without being joined to
the stay damper, the stay damper may be damaged. Verify
that the stay damper is joined to the glove compartment
before closeing the glove compartment.
CAUTION
(3)
(4)
Hook C
1. INSTALLATION
Hook A
Hook A
Glove compartment
Hook B
(1)
(1)
(2)
Stay damper
GPS connector
