Mazda CX-8, Быстрое руководство

Страница: 225 / 624

Turn and Lane-Change
Signals
The ignition must be switched ON to use
the turn and lane-change signals.
▼ Direction Indicators
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to its
original position.
Right turn
Left turn
Right lane change
Left lane change
OFF
The direction indicators in the instrument
cluster flash according to the operation of
the direction indicator lever to show which
signal is working.
NOTE

If an indicator light stays on without
flashing or if it flashes abnormally, one
of the direction indicator bulbs may be
burned out.

A personalised function is available to
change the turn indicator sound volume.
(page 9-9)
▼
Lane-Change Signals
Move the lever halfway toward the
direction of the lane change
― until the
indicator flashes ― and hold it there. It
will return to the off position when
released.
▼
Three-Flash Turn Signal
After releasing the direction indicator
lever, the direction indicator flashes 3
times. The operation can be cancelled by
moving the lever in the direction opposite
to which it was operated.
NOTE
The three-flash turn signal function can be
switched to operable/inoperable using the
personalisation function.
Refer to Personalisation Features on page
9-9.
When Driving
Switches and Controls
4-49
CX-8_8HJ9-EI-19E_Edition2_old 2020-4-15 13:00:04