Mazda CX-8, Быстрое руководство

Страница: 189 / 624


The ambient temperature is high or low.

After the battery terminals are
disconnected for some reasons such as
for battery replacement.

(SKYACTIV-D 2.2)
After PM removal is performed by the
diesel particulate filter (DPF).
Engine-stop period is short or time until
next engine idle stop is long

The ambient temperature is high or low.

The battery power is depleted.

Power consumption by the vehicle's
electrical parts is high.
Engine restarts automatically while
engine idling is stopped
Under the following conditions, the engine
restarts automatically.

The i-stop OFF switch is pressed until
the beep sounds.

The air conditioner is operated with the
airflow mode in the
position.

The temperature setting dial of the air
conditioner is set to maximum heating
or maximum cooling (A/C ON).

The cabin temperature is largely
different from the set temperature of the
air conditioner.

The brakes are released slightly on a
slope and the vehicle begins to move.

Two minutes have elapsed since the
idling was stopped.

The battery power is depleted.

The accelerator pedal is depressed with
the selector lever in the D or M (not in
second gear fixed mode) position.

The selector lever is shifted to the R
position.

The selector lever is shifted from N or P
position to D or M (not in second gear
fixed mode) position.

The steering wheel is operated with the
selector lever in the D or M (not in
second gear fixed mode) position.

The selector lever is in the M position
and the second gear fixed mode is
selected.

With the selector lever in the P or N
position, or the D/M range, the driver's
seat belt is unfastened, the driver's door
is opened, or the bonnet is opened.
Selector lever is operated while engine
idling is stopped
If the selector lever is shifted from D or M
(not in second gear fixed mode) position to
N or P position while engine idling is
stopped, the engine does not restart even
when the brake pedal is released. The
engine will restart if the brake pedal is
depressed again or the selector lever is
shifted to the D, M (not in second gear
fixed mode), or R position. (For the
purposes of safety, always keep the brake
pedal depressed when shifting the selector
lever while engine idling is stopped.)
If the selector lever is shifted from the D
or M (not in second gear fixed mode) to
the N or P position, and the driver's seat
belt is unfastened or the driver's door is
opened, the engine restarts.
Battery terminals are disconnected
Engine idling may not stop right after the
battery terminals are disconnected. In
addition, if the battery is replaced, the
i-stop functions must be verified. Consult
an expert repairer, we recommend an
Authorised Mazda Repairer.
When Driving
Start/Stop Engine
4-13
CX-8_8HJ9-EI-19E_Edition2_old 2020-4-15 13:00:04