Mazda CX-52017 Скачать руководство пользователя страница 547

Страница: 547 / 664

7–5

If Trouble Arises

Flat Tire

CAUTION







When using the temporary spare tire,

driving stability may decrease compared
to when using only the conventional tire.
Drive carefully.







To avoid damage to the temporary

spare tire or to the vehicle, observe the
following precautions:







Do not exceed 80 km/h (50 mph).







Avoid driving over obstacles. Also, do

not drive through an automatic car
wash. This tire's diameter is smaller
than a conventional tire, so the
ground clearance is reduced.







Do not use a tire chain on this tire

because it will not fi t properly.







Do not use your temporary spare

tire on any other vehicle, it has been
designed only for your Mazda.







Use only one temporary spare tire on

your vehicle at the same time.

To remove the spare tire

1. Open the luggage board, and remove it.

2. For vehicles equipped with a sub-

woofer, uncouple the connector.

Connector

NOTE

Extra strength may be required to

uncouple the connector. Be sure to squeeze

the tab

rmly.

CX-5_8FN1-EA-16L_Edition1.indb 5

2016/12/12 10:07:19

Содержание CX-52017

























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CX-52017

Отзывы:

Mazda CX-52017, Руководство пользователя, Страница: 547 / 664

Результаты поиска

Содержание CX-52017

Отзывы: