manualshive.com logo in svg

Mazda CX-5, Руководство пользователя, Страница: 34 / 840

Поделиться
Скачать
Mazda CX-5 Скачать руководство пользователя страница 34

Make sure there is nobody in the rear seat
area before operating (pulling) the remote
handle:

Not checking the rear seat area for persons
before folding the seatbacks with the strap/
remote handle is dangerous. The rear seat
area is difficult to see from the rear of the
vehicle. Operating (pulling) the remote
handle without checking could cause injury
to a person when a seatback suddenly flips
forward.

CAUTION

Before folding the seatbacks down with
the remote handle, make sure there is no
cup in a rear cup holder. Folding the
seatbacks with the remote handle while
a cup is in the cup holder could soil or
damage the seat bottom and seatback.

Be careful of the following when using
the remote handle:

On a downward slope, the seatback
could flip forward faster than on a flat
surface.

On an upward slope, the seatback may
not fold down. When the seatbacks
cannot be folded down with the
remote handle, pull the rear seatback
forward from inside the vehicle.

(Folding the left seatback)

Be careful when operating the remote
handle with the centre seatback folded
down. If a person sitting in the right rear
seat places a hand on the centre
seatback, it could be pinched by a
seatback or seat component causing
injury.

Using the lever

1.

(With rear seat warmer)

Turn the rear seat warmer switch off.
Refer to Seat Warmer on page 2-21.

2. Pull the lever and fold the seatback

forward.

Folding only centre seatback

Using remote handle

*

1.

(With rear seat warmer)

Turn the rear seat warmer switch off.
Refer to Seat Warmer on page 2-21.

2. If the centre head restraint is in the

position for use, store it.

Essential Safety Equipment

Seats

2-16

*Some models.

CX-5_8HD5-EE-18K_Edition2

2018-11-22 13:14:48

Содержание CX-5









































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов