Mazda CX-30 2020, Руководство пользователя

Страница: 482 / 680

Wiper Blades
▼
Wiper Blades
CAUTION

Hot waxes applied by automatic car
washers have been known to affect
the wiper's ability to clean windows.

To prevent damage to the wiper
blades, do not use petrol, paraffin,
paint thinner, or other solvents on or
near them.

When the wiper lever is in the AUTO
position and the ignition is switched
ON, the wipers may move
automatically in the following cases:

If the windscreen above the rain
sensor is touched.

If the windscreen above the rain
sensor is wiped with a cloth.

If the windscreen is struck with a
hand or other object.

If the rain sensor is struck with a
hand or other object from inside
the vehicle.
Be careful not to pinch hands or
fingers as it may cause injury, or
damage the wipers. When washing
or servicing the vehicle, make sure
the wiper lever is in the OFF
position.

Before lifting the windscreen wiper
blades off the windscreen, always
follow the procedure for moving the
windscreen wiper blades. Otherwise,
a wiper blade, wiper arm, or the
bonnet could be damaged.
Refer to the Replacing Windscreen
Wiper Blades (page 6-32) section
for the procedure on how to move
the windscreen wiper blades to the
service position.
Contamination of either the
windscreen or the blades with foreign
matter can reduce wiper effectiveness.
Common sources are insects, tree sap,
and hot wax treatments used by some
commercial car washes.
If the blades are not wiping properly,
clean the window and blades with a
good cleaner or mild detergent; then
rinse thoroughly with clean water.
Repeat if necessary.
▼
Replacing Windscreen Wiper
Blades
When the wipers no longer clean well,
the blades are probably worn or
cracked.
Replace them.
CAUTION

To prevent damaging a windscreen
wiper blade, wiper arm, or the
bonnet, perform the following
procedure.

Before lifting the windscreen wiper
blades off the windscreen, always
move them to the service position.

When putting the windscreen
wiper blades back on the
windscreen, make sure that they
are in the service position before
switching the ignition ON and
operating the windscreen wipers.

Replace with Mazda genuine wiper
blades. If they are replaced with
wiper blades other than a Mazda
genuine product, they may not wipe
with the same efficiency as the
genuine product.

To prevent damage to the wiper
arms and other components, do not
try to sweep the wiper arm by hand.
Maintenance and Care
Owner Maintenance
6-32
CX-30_8HQ1-EE-19I_Edition2_new 2019-10-17 16:47:52