Mazda 3 Facelift 2006, Руководство по обучению

Страница: 61 / 94

Body & Accessories Security and Locks
Erasing registered card keys
1. Establish communication between M-MDS and the vehicle.
2. Select the option Toolbox
→
Body
→
Security
→
PATS Functions .
3. Select the option “Card Key Code Erase” and carry out the security access procedure
(read out the M-MDS outcode, and input corresponding incode).
NOTE: After erasing all registered card keys at least one card key must be programmed for
the system to operate correctly.
Steering lock unit programming
•
If the steering lock unit is replaced, the new unit must be programmed using M-MDS.
NOTE: Do not program the steering lock unit while M-MDS or any other computer devices
are in the vehicle. Make sure all card keys are operational and have good batteries.
NOTE: To program the steering lock unit a registered card key is necessary. If there is no
registered card key, perform the card key programming first and then the steering
lock unit programming.
1. Bring a registered card key into the vehicle and close all the doors.
2. Establish communication between M-MDS and the vehicle.
3. Select the option Toolbox
→
Body
→
Security
→
PATS Functions .
4. Select the option “Steering Lock Unit Programming” and carry out the security access
procedure (read out the M-MDS outcode, and input corresponding incode).
Service Training Mazda3 F/L 09-13