Mazda 3 2019 страница 137 Скачать руководство пользователя

Страница: 137 / 592

WARNING

Use only the same size and type tires (snow,
radial, or non-radial) on all four wheels:

Using tires different in size or type is
dangerous. Your vehicle's handling could
be greatly affected and result in an
accident.

CAUTION

Check local regulations before using
studded tires.

NOTE

The tire pressure monitoring system may
not function correctly when using tires
with steel wire reinforcement in the
sidewalls (page 4-215).

▼

Tire Chains

Check local regulations before using tire
chains.

CAUTION



Chains may affect handling.



Do not go faster than 50 km/h (30 mph)
or the chain manufacturer's
recommended limit, whichever is lower.



Drive carefully and avoid bumps, holes,
and sharp turns.



Avoid locked-wheel braking.



Do not use chains on a temporary spare
tire; it may result in damage to the
vehicle and to the tire.



Do not use chains on roads that are free
of snow or ice. The tires and chains could
be damaged.



Chains may scratch or chip aluminum
wheels.

NOTE



The tire pressure monitoring system may
not function correctly when using tire
chains.

Install the chains on the front tires only.
Do not use chains on the rear tires.
Please consult an Authorized Mazda
Dealer.

Installing the chains

1. If your vehicle is equipped with wheel

covers remove them, otherwise the
chain bands will scratch them.

2. Secure the chains on the front tires as

tightly as possible.
Always follow the chain
manufacturer's instructions.

3. Retighten the chains after driving

1/2―1 km (1/4―1/2 mile).

Before Driving

Driving Tips

3-47

Mazda3_8HE9-EA-18K_Edition1

2018-10-17 19:05:10

Содержание 3 2019

















































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3 2019

Отзывы:

Похожие инструкции для 3 2019

Бренды по названию

Популярные бренды

Mazda 3 2019, Руководство пользователя

Результаты поиска

Содержание 3 2019

Отзывы:

Похожие инструкции для 3 2019

Бренды по названию

Популярные бренды