Mazda 2011 CX-9 Скачать руководство пользователя страница 501

Страница: 501 / 605

Black plate (500,1)

CAUTION

Radiator coolant will damage
paint.
Rinse it off quickly if spilled.

Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals will
cut down on the coolant's
effectiveness.

Don't add only water. Always add
a proper coolant mixture.

The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant to
prevent corrosion and freezing.

DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.

DO NOT MIX alcohol or methanol
with the coolant. This could
damage the cooling system.

Don't use a solution that contains
more than 60% antifreeze.
This would reduce effectiveness.

NOTE

If the

“

FL22

”

mark is shown on or near the

cooling system cap, it is recommended to use
Mazda Genuine FL22 engine coolant (page
8-3).

If the coolant reservoir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.

8-22

Maintenance and Care

Owner Maintenance

CX-9_8BH3-EC-10H_Edition1 Page500
Friday, July 30 2010 3:2 PM

Form No.8BH3-EC-10H

Содержание 2011 CX-9






























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2011 CX-9

Отзывы:

Mazda 2011 CX-9, Руководство пользователя, Страница: 501 / 605

Результаты поиска

Содержание 2011 CX-9

Отзывы: