Instrument Cluster
7
8
Low Fuel Level
KEY Warning Light
(
RED
)
Advanced key not detected
or transmitter battery is dead.
KEY Indicator Light
(
GREEN
)
On: Advanced key detected; engine
is ready to start.
Flashing: Advanced key battery is low.
Check Fuel Cap
ABS (Antilock Brake
System) Malfunction
Lights On (Exterior)
Tire Pressure
Monitoring System
(TPMS) Warning Light
On/Warning Beep: Low tire pressure
in one or more tires.
TCS OFF
(Traction Control System)
Charging System
Malfunction
Powertrain Malfunction/
Reduced Power
BSM OFF
(Blind Spot Monitoring)
Check Engine Light
TACHOMETER
FUEL GAUGE
Brake Warning Light
Parking brake on/low brake
fluid/malfunction
Turn Signals/Hazard
Warning Indicator Lights
Automatic Transmission
Malfunction
Shift Lever Position
Indicator
Headlight High Beams On
Traction Control System
(TCS)/Dynamic Stability
Control (DSC)
On: TCS/DSC malfunction
Flashing: TCS/DSC operating
Airbag/Front Seat Belt
Pretensioner System
Malfunction
Low Engine Oil Pressure
Security Indicator Light
Door Ajar
4WD
On: System is not normal; dealer
inspection required.
Flashing: Differential oil temperature
is high; dealer inspection required.
Seat Belt
Unbuckled/Malfunction
Cruise Main Indicator
Light On
(
AMBER
)
/
Cruise Set Indicator
Light On
(
GREEN
)
Low Washer Fluid Level
SPEEDOMETER
TRIP METER
SELECTOR
2
INSTRUMENT
CLUSTER DIMMER
1
ENGINE COOLANT
TEMPERATURE GAUGE
ODOMETER/
TRIP METER
SHIFT LEVER
POSITION INDICATOR
TCS
OFF
KEY
KEY
4WD
BSM
OFF
GLOSSARY OF WARNING AND INDICATOR LIGHTS
NOTE:
See Owner’s Manual for more details and explanations.
NOTE:
Low ambient temperature and/or high altitude causes tire pressures to drop
and may turn the TPMS warning light on. If the warning light comes on, check the tire
pressure and fill the tires as soon as possible, preferably before moving the vehicle and
warming up the tires. Tire pressure should be checked when the tires are cold.
1
If the instrument cluster and other dashboard illuminations do not dim when turning on the headlights,
push the Instrument Cluster Dimmer knob.
2
• Push to toggle between trip meter A & B.
• When a trip meter is selected, push and hold to reset to zero.
C
P
