Mazda 2009 MX-5 Miata Скачать руководство пользователя

Страница: 120 / 444

Black plate (120,1)

13. Lift up the deck using two adults, one

on each side of the vehicle, and open
the deck completely.

CAUTION

Lift the deck using two adults.
Doing it alone could result in
injury or the deck lid mechanism
being twisted which could damage
it.

Do not let go of the deck lid on
both sides until it is fully open. The
deck lid could fall if it is released
too soon and cause injury.

Do not attempt to forcefully lift the
deck. If the lock has not detached
and the deck is forcefully lifted, it
could damage the deck.

Closing the hardtop

CAUTION

The procedure should be done by
at least two adults. Do not do it
alone so as not to cause injury or
vehicle damage.

Some steps in the procedure
require holding your body in a
strained position for extended
periods and if over exerted it could
result in injury.

Be very careful when closing the
hardtop to prevent pinching and
possible injury.

1. Grasp the hardtop along the side and

front surfaces and lift it up enough to
create a clearance at the rear of
hardtop.

3-58

Knowing Your Mazda

Doors and Locks

MX-5_8Z78-EA-08K_Edition1 Page120
Thursday, October 23 2008 1:53 PM

Form No.8Z78-EA-08K

Содержание 2009 MX-5 Miata





























































































































































































































































































































































































































































Результаты поиска

Содержание 2009 MX-5 Miata

Отзывы:

Похожие инструкции для 2009 MX-5 Miata

Бренды по названию

Популярные бренды

Mazda 2009 MX-5 Miata, Руководство пользователя

Результаты поиска

Содержание 2009 MX-5 Miata

Отзывы:

Похожие инструкции для 2009 MX-5 Miata

Бренды по названию

Популярные бренды