D R I V E R C O N T R O L S
Always check the Owner’s Manual for more operating information and safety features
Driver
Controls
Transaxle
Quick Tips
2001 Mazda
MPV
page 6
page 7
Revised January 9, 2001
Turn signal/lighting
control lever
OFF = Lights off
= Tail, parking and dashboard
lights on: Rotate knob (
1
)
to first notch
= Tail, parking, dashboard
and head lights on: Rotate
knob (
1
) to second notch
High beams on/off: Push lever
forward to detent/pull back
to detent
To flash high beams: Pull lever
back slightly and release
Turn signals right/left: Move lever
up/down
Wiper/washer control lever
To activate interval wipers:
Push lever down to first
detent and rotate knob (
2
)
to desired speed
To activate wiper normal or low
speed: Push down to second
detent
To activate high speed: Push
lever down to third detent
To activate washer: Pull
lever back
To activate mist: Push lever
up and release
To activate rear interval wiper:
Rotate knob (
3
) up to INT
To activate rear normal speed
wiper: Rotate knob (
3
) up to ON
To activate rear washer: Rotate
knob (
3
) to
and release
Cruise control*
Operates above 25 mph
Press and release main switch (
1
)
To set speed: Accelerate to desired
speed and move lever (
2
) down
and release
To decelerate: Move lever (
2
)
down and release at desired
speed; or tap brake pedal
Move lever (
2
) down at
desired speed
Incremental deceleration: Move
lever (
2
) down and release; each
tap = minus 1 mph
Incremental acceleration: Move
lever up and release; each tap =
plus 1 mph
To cancel: Tap brake pedal,
pull lever (
2
) back or press
main switch (
1
) again
Return to preset speed (after
braking): Move lever (
2
) up
and release
Automatic transaxle
P = Park
To move gearshift from Park:
Press firmly on brake pedal
R = Reverse
N = Neutral
No gear engaged
D (Overdrive)
For normal driving: Shifts through
four forward gears automatically
Tip: Torque converter lock-up
improves fuel economy and
can feel like an additional gear
D (Overdrive Off)
Press overdrive off switch (
3
) to
disengage/engage overdrive;
indicator light on instrument
panel will illuminate; shifts
through three forward gears
automatically
Provides extra power and increased
engine braking; stops 3rd-4th
gear cycling in stop/go driving
2 = Second
Provides extra power and
increased engine braking
Use to reduce wheel spin when
starting on slippery surfaces
1 = First
Use for engine braking when
2nd is not sufficient
1
2
1
3
2
3
*Denotes optional equipment
