Mazda 13B-MSP, Руководство по ремонту

Страница: 8 / 71

GENERAL INFORMATION
00–00–7
00–00
Arrangement of Parts
•
All disassembled parts should be carefully
arranged for reassembly.
•
Be sure to separate or otherwise identify the parts
to be replaced from those that will be reused.
Cleaning of Parts
•
All parts to be reused should be carefully and
thoroughly cleaned in the appropriate method.
Warning
••••
Using compressed air can cause dirt and
other particles to fly out causing injury to
the eyes. Wear protective eye wear
whenever using compressed air.
Reassembly
•
Standard values, such as torques and certain
adjustments, must be strictly observed in the
reassembly of all parts.
•
If removed, the following parts should be replaced
with new ones:
— Oil seals
— Gaskets
— O-rings
— Lock washers
— Cotter pins
— Nylon nuts
•
Depending on location:
— Sealant and gaskets, or both, should be
applied to specified locations. When sealant
is applied, parts should be installed before
sealant hardens to prevent leakage.
— Oil should be applied to the moving
components of parts.
— Specified oil or grease should be applied at
the prescribed locations (such as oil seals)
before reassembly.
WGIWXX0029E
WGIWXX0030E
WGIWXX0031E
CHU0014W006