18
T. PORT INSTALL QUALITY CHECK / TROUBLESHOOTING
Quality Check
Possible Issue
Solution(s)
1. Reconnect battery terminal with tightening
torque of 4.0 - 6.0N-m
.
2. Reprogram automatic windows.
3. Install room and audio fuses
.
4. Turn on accessory power.
5. Press the power button, located on the top
right corner of both monitors.
• No Power to
RSES
• Verify vehicle
accessory power is
turned on
•
Confirm RSES harness
is properly seated
into vehicle accessory
power cable connector
under driver seat
• Check white RSES
connections at carpet
opening under each
seat, and confirm they
are properly seated
6. Insert the SD card into the driver’s side
monitor.
7. Press the “A” button on the remote control
and then scroll to SD Source using the left/
right arrows. Press the “Checkmark” button
to select SD.
8. Scroll to “Movies” using the left/right
buttons and press the “Checkmark” button
to select. The movie will begin playing.
9. Press the “B” button on the remote control
in front of the passenger monitor.
10. Scroll to “Monitor” using the left/right
buttons on the remote control.
11. Press the “Checkmark” button on the
remote control to select “Monitor” and
the movie should now be seen on both
screens.
• Cannot view
same image
on both
monitors
•
Confirm GMSL Coax
connections at carpet
under both seats, and
verify connectors are
fully tightened
