Maytel HELMET CLIP INTERCOM, Руководство пользователя

Страница: 14 / 23

page 13 HC-2.4G User’s Manual
6.5 ID Selection
Turn on the power of the device.
Long press the MODE button to go to SETTING mode.
Short press MODE button to go to ID Setting screen. blinks..
Press Up/Down button to set to the desired ID.
RM mode ID setting
- ID can be set to 00~10.
- ID 0 is set as a Master ; Must be only one in a group.
- ID 1 is set as a SubMaster ; Must be only one in a group.
- IDs 2~8 are set as Slaves each assigned with fixed Channel
; Must not be overlapped within a group
- ID 9 is Shared. It’s number is unlimited.
- ID 10 is set as Listen Only Slave.
; Multiple devices can be set as ID 9,10 in a group
S1 mode ID setting
- ID can be set to 00~09.
- ID 0 is set as a Master ; Must be only one in a group.
- IDs 1~7 are set as Slaves each assigned with fixed Channel
; Must not be overlapped within a group
- ID 8 is Shared. It’s number is unlimited.
- ID 9 is set as Listen Only Slave.
; Multiple devices can be set as ID 8,9 in a group
ID setting function to let the user to change ID when needed.
Channel can be set from 0~39 .
Long press the MODE button to finish the setting.