4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed (all models)
■
Drill
■
1
¹⁄₄
" (3.0 cm) drill bit
■
¹⁄₈
" (3.0 mm) drill bit for pilot holes
■
Pencil
■
Wire stripper or utility knife
■
Tape measure or ruler
■
Caulking gun and weatherproof caulking compound
■
Flat-blade screwdriver
■
Phillips screwdriver
■
Saber or keyhole saw
■
Metal snips
■
Compass or 8" (20.3 cm) circle template
Parts Supplied (all models)
■
T-10 Torx
®†
adapter
■
T-20 Torx
®†
adapter
■
4 - 4.5 x 13 mm mounting screws
Parts Needed (all models)
■
3 - UL listed wire connectors
■
Vent clamps/duct tape as required
For cabinets with recessed bottoms:
■
Two 2" (5.1 cm) wide filler strips. Length and thickness
determined by recess dimensions.
■
Four flat head wood screws or machine screws with washers
and nuts (to attach filler strips).
Models UXT2030AY/UXT2036AY (vented installation)
Parts supplied
Remove parts from package. Check that all parts are included.
■
2 - 3.5 x 9.5 mm screws
■
7" (17.8 cm) round vent mounting plate
Parts needed
■
7" (17.8 cm) round metal vent system
■
Wall or roof cap with damper to match vent system
■
1 - 75W max, 120V incandescent light bulb
Models UXT3030AY/UXT3036AY (vented installation)
Parts supplied
Remove parts from package. Check that all parts are included.
■
2 - 3.5 x 9.5 mm screws
■
3
¹⁄₄
" x 10" (8.3 x 25.4 cm) rectangular vent connector
Parts needed
■
3
¹⁄₄
" x 10" (8.3 x 25.4 cm) rectangular metal vent system
■
Wall or roof cap with damper to match vent system
■
1 - 75W max, 120V incandescent light bulb
Models UXT4030AY/UXT4036AY
(recirculation installation only)
Parts needed
■
1 - 75W max, 120V incandescent light bulb
Models UXT4230AY/UXT4236AY
(vented or non-vented [recirculation] installation)
Parts supplied
Remove parts from package. Check that all parts are included.
■
2 - 3.5 x 9.5 mm screws
■
3
¹⁄₄
" x 10" (8.3 x 25.4 cm) rectangular vent connector
Parts needed
■
1 - 75W max, 120V incandescent light bulb
■
Wall or roof cap with damper to match vent system
For 7" (17.8 cm) round vented installations:
■
7" (17.8 cm) round metal vent sytem
■
7" (17.8 cm) round damper. For information on ordering, see
the “Accessories” section.
■
7" (17.8 cm) round vent mounting plate. For information on
ordering, see the “Accessories” section.
For 3
¹⁄₄
" x 10" (8.3 x 25.4 cm) rectangular vented installations:
■
3
¹⁄₄
" x 10" (8.3 x 25.4 cm) rectangular metal vent system
For non-vented (recirculation) installations:
■
Charcoal filter kit. For information on ordering, see the
“Accessories” section.
Models UXT5230AY/UXT5236AY
(vented or non-vented [recirculation] installation)
Parts supplied
Remove parts from package. Check that all parts are included.
■
2 - 3.5 x 9.5 mm screws
■
3
¹⁄₄
" x 10" (8.3 x 25.4 cm) rectangular damper/vent connector
Parts needed
■
Wall or roof cap with damper to match vent system
For 7" (17.8 cm) round vented installations:
■
7" (17.8 cm) round metal vent sytem
■
7" (17.8 cm) round damper. For information on ordering, see
the “Accessories” section.
■
7" (17.8 cm) round vent mounting plate. For information on
ordering, see the “Accessories” section.
For 3
¹⁄₄
" x 10" (8.3 x 25.4 cm) rectangular vented installations:
■
3
¹⁄₄
" x 10" (8.3 x 25.4 cm) rectangular metal vent system
For non-vented (recirculation) installations:
■
Charcoal filter kit. For information on ordering, see the
“Accessories” section.
†®TORX is a registered trademark of Saturn Fasteners, Inc.
