Maytag Precision Touch Control 800 Скачать руководство пользователя страница 28

27

If You Need Service

Full One Year Warranty -
Parts and Labor

For 

one (1) year 

from the original retail

purchase date, any part which fails in
normal home use will be repaired or
replaced free of charge.

Limited Warranties - Parts Only

Second Through Fifth Year -

 From the

original purchase date, parts listed below
which fail in normal home use will be
repaired or replaced free of charge for
the part itself, with the owner paying all
other costs, including labor, mileage and
transportation, trip charge and diagnostic
charge, if required.

• Glass-Ceramic Cooktop: 

Due to

thermal breakage, discoloration,
cracking of rubber edge seal, pattern
wear.

Electric Heating Elements: 

Radiant

surface elements on electric cooking
appliances.

Canadian Residents

The above warranties only cover an
appliance installed in Canada that has
been certified or listed by appropriate
test agencies for compliance to a
National Standard of Canada unless the
appliance was brought into Canada due
to transfer of residence from the United
States to Canada.

Limited Warranty Outside the
United States and Canada -
Parts Only

For one (1) year from the date of original
retail purchase, any part which fails in
normal home use will be repaired or
replaced free of charge for the part itself,
with the owner paying all other costs,
including labor, mileage and transporta-
tion, trip charge and diagnostic charge, if
required.

The specific warranties expressed above
are the 

ONLY

 warranties provided by the

manufacturer. These warranties give you
specific legal rights, and you may also
have other rights which vary from state to
state.

What is Not Covered By These
Warranties:

1. Conditions and damages resulting from any of the following:

a. Improper installation, delivery, or maintenance.
b. Any repair, modification, alteration, or adjustment not authorized by

the manufacturer or an authorized servicer.

c. Misuse, abuse, accidents, or unreasonable use.
d. Incorrect electric current, voltage, or supply.
e. Improper setting of any control.

2. Warranties are void if the original serial numbers have been removed, altered,

or cannot be readily determined.

3. Light bulbs.

4. Products purchased for commercial or industrial use.

5. The cost of service or service call to:

a. Correct installation errors.
b. Instruct the user on the proper use of the product.
c. Transport the appliance to the servicer.

6. Damage to the glass cooktop caused by the use of cleaners other than the

recommended cleaning creams and pads.

7. Damage to the glass cooktop caused by hardened spills of sugary materials or

melted plastic that are not cleaned according to the directions in the use and
care guide.

8. Consequential or incidental damages sustained by any person as a result of

any breach of these warranties. Some states do not allow the exclusion or
limitation of consequential or incidental damages, so the above exclusion may
not apply.

Call the dealer from whom your appliance was purchased or call Maytag
Services

SM

, Maytag Customer Assistance at 1-800-688-9900 U.S.A. or

1-800-688-2002 Canada to locate an authorized servicer.

Be sure to retain proof of purchase to verify warranty status. Refer to
WARRANTY for further information on owner’s responsibilities for warranty
service.

If the dealer or service company cannot resolve the problem, write to Maytag
Services

SM

, Attn: CAIR

®

 Center, P.O. Box 2370, Cleveland, TN 37320-2370, or

call 

1-800-688-9900 U.S.A. or 1-800-688-2002 Canada

.

U.S. customers using TTY for deaf, hearing impaired or speech impaired, call
1-800-688-2080.

User’s guides, service manuals and parts information are available from
Maytag Services

SM

, Maytag Customer Assistance.

When writing or calling about a service problem, please include:
a. Your name, address and telephone number;
b. Model number and serial number;
c. Name and address of your dealer or servicer;
d. A clear description of the problem you are having;
e. Proof of purchase (sales receipt).

Notes:

Warranty & Service

Содержание Precision Touch Control 800





















































































Отзывы: