4
TOOLS, PARTS AND MATERIALS
Remove the microwave oven and all materials from the carton. To install
microwave over the range, you will need following materials and tools.
Check all materials and accessories before you begin installation. If you find
some parts missing, contact an Authorized Service Center.
Parts you need to install your oven
(You may not need to use all of these parts.)
•
Upper Cabinet Template
1
•
Wall Template
1
Tools recommended for installation
•
Phillips screwdriver
•
Pencil
•
Measuring tape
•
Clear tape
•
Duct tape
•
Electric drill
•
Keyhole saw
•
3
/
8
”
wood drill bit
•
3
/
4
”
wood drill bit
•
Stud finder
•
2” diameter hole drill bit
•
Hammer
•
Caulk (wall venting)
Power Supply Cord Bushing
(1)
Use with metal cabinet.
1
/
4
”
x 2” Wood Screw
(4 screws)
1
/
4
”
x 3” Bolt and Spring
Toggle Heads
(4 each)
For drywall holes.
1
/
4
”
x 3” Bolt and Washer
(2 each)
To secure to the upper
cabinet.
Power Supply Cord Clamp
and Mounting Screw
(1 each)
To hold the power cord.
Damper Assembly
(1)
For roof/ wall venting
installation.
Grease Filter
(2)
Charcoal Filter
(2)
For room venting.
,
,,
Mounting Plate
(1)
Attached on back of microwave.
OTR-Installation-M1.fm Page 4 Wednesday, September 27, 2000 4:03 PM
