PRODUCT MODEL NUMBERS
EXHAUST VENTING
MGDE900V
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10057354
07-29-08
RECOMMENDED INSTALLATION SPACING FOR RECESSED OR CLOSET
INSTALLATION, WITH STACKED WASHER AND DRYER
UNDERCOUNTER INSTALLATION
Dimensions shown are for recommended spacing.
0"
(0 cm)
1"*
(2.5 cm)
1"*
(2.5 cm)
38" min.
(96.52 cm)
27"
(68.6 cm)
NOTE:
Side and bottom exhaust installations have a 90
°
turn
inside the dryer. To determine maximum exhaust length, add one
90
°
turn to the chart.
Number of
90
°
turns
or elbows
Type of
vent
Box or
Louvered
hoods
Angled
hoods
0
Rigid
metal
Flexible metal
64 ft (20 m)
36 ft (11 m)
58 ft (17.7 m)
28 ft (8.5 m)
1
Rigid
metal
Flexible metal
54 ft (16.5 m)
31 ft (9.4 m)
48 ft (14.6 m)
23 ft (7 m)
2
Rigid
metal
Flexible metal
44 ft (13.4 m)
27 ft (8.2 m)
38 ft (11.6 m)
19 ft (5.8 m)
3
Rigid
metal
Flexible metal
35 ft (10.7 m)
25 ft (7.6 m)
29 ft (8.8 m)
17 ft (5.2 m)
4
Rigid
metal
Flexible metal
27 ft (8.2 m)
23 ft (7 m)
21 ft (6.4 m)
15 ft (4.6 m)
A . Louvered hood
s
tyle
B . Box hood
s
tyle
4"
(10.2 cm)
4"
(10.2 cm)
A
B
4"
(10.2 cm)
2-1/2"
(6.4 cm)
Dimensions shown are for minimum spacing.
Recommended hood styles
Angled hood style is
acceptable.
Select the route that will provide the straightest and most
direct path outdoors. Plan the installation to use the fewest
number of elbows and turns. Use the fewest 90° turns
possible.
Do not use vent runs longer than specified in vent length
chart.
Determine the number of elbows you will need.
Gas Dryer
Page 2 of 2
48 in.
2
*
(310 cm
2
)
3"* (7.6 cm)
3"* (7.6 cm)
1"* (2.5 cm)
24 in.
2
*
(155 cm
2
)
* Required spacing
6"* (15.2 cm)
76"
(193 cm)
27"
(68.6 cm)
5"*
(12.7 cm)
1"
(2.5 cm)
1"
(2.5 cm)
* Required spacing
