7
Tools Needed:
203 mm (8")
203 mm (8") or 254 mm (10")
Flat-Blade Screwdriver
Phillips Screwdriver
or 254 mm (10")
Adjustable Wrench
Pipe Wrench
(that opens to 25 mm (1"))
Torx T-20
†
Security
25 mm (1") Hex-Head
8 mm (5⁄16") Socket Wrench
Pliers (that open to
Screwdriver or Bit
Socket Wrench
39 mm [1
9
/
16
"])
Level
Utility Knife
6 mm (1/4") Nut Driver
686 mm (27")
Wood Block
Caulk Gun and Caulk
Vent Clamps
Pipe-Joint Compound
Putty Knife
(for installing new exhaust vent)
Suitable for Gas Type
Flashlight (optional)
25 mm (1")
Ruler or Measuring Tape
Open-End Wrenches
TOOLS & PARTS
Parts Supplied:
Foot Boots (4)
Leveling Legs (4)
Security Cone
5/16" Hex Head – 18 x 2
1
⁄
2
"
Security Bolt
†
TORX and T20 are trademarks of Acument Intellectual Properties, LLC.
These units are sold in multiple regions with different
requirements for measuring capacity. Below are a few of
the valid forms of measure posted on this product:
Dry Linen Capacity:
A weight measure that reflects a minimum
threshold for dry volume capacity that is needed for import
tariff purposes.
IEC Capacity:
The capacity measure that represents the
maximum capacity of dry linens and textiles which the
manufacturer declares can be treated in a specific cycle.
Dry
Linen
Capacity
10.5 kg (23 lb)
IEC
Capacity
9.0 kg (20 lb)
Sound Level
LpA: 58 dB(A) (Kpa+/-10 dB(A))
SPECIFICATIONS
NOTE:
The circuit diagram for this dryer is located inside
the lower front panel, within the Tech Sheets.
Technical Specifications:
220 – 240 V, 50 Hz. AC
4575W
Total mass: 68 kg max.
