Maytag MDE 9701, Инструкция по использованию и уходу

Страница: 12 / 28

12
Anti-crease
Select anti-crease by indexing forwards with the
button. You can select an active period of
between 1 and 3 hours for this option.
indicates that the option is disconnected.
You can select a duration of 1-3 hours for the
active option.
This option means that the drum will rotate
for three seconds per minute after the drying
programme is complete. The programme pre-
vents the fabrics from lying in the same position
and becoming creased.
This is helpful if you are unable to take out
the fabrics promptly at the end of the tumbling
phase.
If you have selected the Buzzer option, a buz-
zer will be heard every time the drum rotates
during this programme. This is to remind you
that the drying programme has ended.
Delayed start
Set the number of hours by which the start will
be delayed by indexing forwards with the
button. The selected time is shown in the dis-
play as you index forwards. A delay of 5 hours
thus means that the machine will start the pro-
gramme 5 hours after pressing the start button.
You can select a delay of between 1 and 24
hours.
indicates that the option is disconnec-
ted and the programme will start directly as
usual.
Low temperature
You can switch the Low temperature option on
or off by pressing the
button.
The LED next to the button will light when
Low temperature is switched on.
Low temperature is not available with the
Air fluff programme.
Buzzer
You can switch the Buzzer option on or off by
pressing the
button.
The LED next to the button will light when
the Buzzer option is switched on.
This option means that the buzzer will sound
for three seconds when the drying programme
has ended.
Quick cooling
You can switch the Quick cooling option on or
off by pressing the
button.
The LED next to the button will light when
Quick cooling is switched on.
Cooling normally continues for 20 minutes.
Quick cooling reduces the cooling period to 5
minutes.
Quick cooling is not available with the Air
fluff programme.
START THE DRYING PROGRAMME WITH
THE BUTTON
The LED next to the button will light
to indicate that the programme has started.
NOTE
If the child lock is on, the button must be held
down for 3 seconds.
Remaining drying time
The remaining drying time is shown in the dis-
play while the programme is operating. (indica-
77