background image

INSTALLATION

3

MOUNTING THE DUCTLESS CONVERSION HOUSING

1. The ductless conversion housing is 

mounted under a kitchen cabinet unit

2. Begin installation by installing wood 

blocking under cabinet as required.

3. Temporarily position the ductless 

conversion housing in the desired 
mounting location. Measure and mark
the mounting holes, and electrical 
access locations with a pencil.

4. Drill out the required openings for 

electrical access.

5. Fasten mounting screws into the  

cabinet wood blocking as marked.
do not completely tighten the screws,
leaving half of the length exposed.

6. Rout electrical cable through knock out 

opening.

7. Hang the ductless conversion housing 

onto screws through key holes and tighten.

8. Temporary remove the diffuser panels from

the range hood.

9. Connect the electrical cable to the range 

hood and screw the hood onto the ductless
conversion housing.

10. Position the carbon filters onto the diffuser 

panels, and attach with rectangular washer
and screw as shown.

11. Re-install the diffuser panels.

12. Carbon filters must be replaced after 

every 120 hours of use (or approximately 
every 2-3 months based on the average 
of 1-2 hrs. OK daily cooking time).

 

Отзывы: