Maytag CG31400ADW Скачать руководство пользователя страница 42

Страница: 42 / 63

B–5

16023522

Use Instructions

(Models CPR1100AD*, CGR1110AD*, CGL1100AD*,

CGR1415AD*, CGR1425AD*, CGR3725AD*, CP31200AD*, CG31200AD*,
CG31400AD*, CP31600AD*, CG31600AD*, CG34800AD*)

Oven Cooking

NOTE:

The display will show 12:00 when the appliance is first connected to power or if power is interrupted. The Bake and Broil

indicators light when function is pressed.

Setting the Clock

1. Press the CLOCK pad.

• The clock time cannot be set if the control is pro-

grammed for a bake, broil or timing operation.

2. Set the correct time of day using the

▲

▼

pads. If the

▲

▼

pad is not pressed within 30 seconds, the program

will cancel. Press the CLOCK pad and begin again.

Setting the Timer

The timer can be set from one minute (:01) up to 99 hours
and 59 minutes (99:59). Time will be displayed in minutes and
not in seconds.

THE TIMER DOES NOT CONTROL THE

OVEN.

1. Press the TIMER pad.

• 0:00 will light and the colon (:) will flash in

the display.

2. Press the

▲

▼

pad until the desired time is displayed.

• The timer will begin as soon as the time is set.

• The flashing colon indicates that a timing operation is in

progress. (The colon will not flash if the time of day or
oven temperature is displayed.)

• Two short beeps signal the end of the operation. “0:00”

will appear in the display.

• If desired, press the CLOCK pad and the time of day will

briefly reappear in the display during a timing operation.

• If desired, press the BAKE or BROIL pads and the

current temperature setting will briefly reappear in the
display during a timing operation.

To cancel the timer operation:

Press and hold the TIMER pad for several seconds.

Manual Clean Oven Control

(select models)

Using the Touchpads

• Press the desired pad.

• Press the

▲

▼

pad to enter time or temperature.

• A beep will sound each time a function pad is pressed. There

is no beep for the

▲

▼

pad.

• A double beep will sound if a programming error occurs.

BAKE

Use for baking and roasting.

BROIL

Use for broiling and top browning.

TIMER

Sets timer.

CLOCK

Use to set time-of-day clock.

CANCEL

Cancels all operations except timer
and clock.

▲

(More)

Enters or changes time, oven

▼

(Less)

temperature. Sets HI or LO broil.

Note:

Four seconds after pressing the

▲

▼

pad, the

time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the

▲

▼

pad, the function will be canceled and the

display will return to the previous display.

A B

C D E F

Содержание CG31400ADW
































































Результаты поиска

Содержание CG31400ADW

Отзывы:

Похожие инструкции для CG31400ADW

Бренды по названию

Популярные бренды

Maytag CG31400ADW, Руководство по обслуживанию

Результаты поиска

Содержание CG31400ADW

Отзывы:

Похожие инструкции для CG31400ADW

Бренды по названию

Популярные бренды