Maytag Built-in Refrigeration, Руководство пользователя

Страница: 63 / 88

57
Cabinet
Leveling System
The Jenn-Air
®
Luxury
™
Line of
Refrigerators use a four point leveling
system. The leveling legs must be
extended down and the wheels lifted off
of the floor for a safe installation. Failure
to get the wheels off of the floor will
result in cabinet walking.
The adjustments for the leveling system
are up front. There are two 3/8” bolt
heads on either side of the cabinet under the toe grille area. The
right adjustments are for the front leveling legs while the left
adjustments operate the rear legs.
Servicer’s Note
You can use the leveling legs to keep the cabinet snug against the
anti-tip bracket.
It is very important that the leveling legs are used to support the
weight of the cabinet once the cabinet is placed. The wheel
assemblies are only to be used for moving the unit into place.
Because of the weight of the unit, protect the flooring when moving
the system.
Door Assembly
The fresh food and freezer doors are foam filled doors. This provides a stiff door with
good energy efficiency.
The gaskets are a dart design. The gasket slides into the gasket retainer from the side.
The hinge assemblies are designed to support several hundred pounds. This weight is a
combination of the door itself, any external trim the customer has had installed and the
contents of the door bins.
The hinges have door closing springs. There are two strengths of door closing springs.
The red door spring is for the right side of the cabinet (refrigerator door). The blue hinge
is for the freezer door.