41
Operate your washer only when you are home. If moving,
or not using your washer for a period of time, follow these
steps:
1.
Unplug or disconnect power to washer.
2.
Turn off water supply to washer to avoid flooding due
to water pressure surges.
HELPFUL TIP:
Attach a reminder note to the washer
to turn the water back on before washer’s next use.
3.
Clean the dispensers. See “Cleaning the Dispensers.”
NON-USE AND VACATION CARE
REMOVING THE DISPENSER
REMOVING THE DISPENSER (cont.)
Removing the Dispenser
To remove:
1.
Pull dispenser drawer out until it stops.
2.
Press down on the release tab and pull straight out
to remove the dispenser.
3.
Lift off cover panel by
pulling straight up.
Single Load Dispenser Drawer
Single Load Dispenser Drawer (cont.)
To replace:
1.
Slide cover panel back onto posts on dispenser.
2.
Align edges of dispenser
with guides in washer,
then slide dispenser
back into slot.
