Maytag 25 series Скачать руководство пользователя страница 37

Страница: 37 / 100

GENERAL PRECAUTIONS

LXN5O181A

LXN5O182A

LXN5O188A

Be aware of the PTO RPM re-
quirements for the implements:

Do  not  use  a  low-revolution
implement  at  high  revolution.
Be sure to the designated PTO
requirements  for  the  imple-
ments.

[Otherwise]
The performance of the imple-
ment may not properly work and
there is a risk of accident or in-
jury or damage to the tractor.

•

WARNING

Only engage or disengage imple-

ments on flat, level area:

Engage  or  disengage  the  im-
plement  on  a  flat  and  safe
place.  Supply  proper  light-
ing  at  all  times  and  especially
night.

[Otherwise]
There is a danger of accident.

•

WARNING

Engage the parking brake dur-
ing warm of engine.

[Otherwise]
The tractor may move and cause
an accident or injury.

•

WARNING

BRANSON 25 SERIES 트랙터-영문판-01.ind25 25

2015-04-29 오후 1:43:22

Содержание 25 series





































































































Результаты поиска

Содержание 25 series

Отзывы:

Бренды по названию

Популярные бренды

Maytag 25 series, Руководство пользователя

Результаты поиска

Содержание 25 series

Отзывы:

Бренды по названию

Популярные бренды