background image

© 2000 Maytag Appliances Sales Company

Section 9.   Dryer Controls Overview

9-9

LCD DRYER

Accessing Service Mode

Press and hold the 

back

 and 

help

 keys for 5

seconds to start the Service Mode.

Pressing the Service Mode keys again, will
take the machine out of the Service Mode.

The Service Mode screen lists four different
touch panels; user interface test (membrane
switch test), system check, diagnostic codes
and exit service mode.   Pressing any of the
touch screens will activate a different screen
dedicated to that function.

The diagnostic codes listed are the last four
codes assigned by the dryer.

After 5 minutes of inactivity in Service Mode,
the dryer will exit Service Mode and return to
the state just prior to Service Mode.  If a
service test is being run, the control will
remain in Service Mode until 5 minutes of
inactivity has occurred at the end of this
cycle.

User Interface Test:

This will check the touch screen.  The service
technician is prompted  to “Touch the four
corners and center of the touch screen in any
order."  When each area is pressed, the
display  will reverse image.  If all areas are
sensed, the control will display “Touch screen
test passed."  If any area(s) is not sensed
within 5 seconds, the technician will be
prompted to “Touch the area(s) not
highlighted."  If the area can still not be
sensed within 5 seconds, the control will
display “Touch screen test failed."  In either
case scenario, the screen will step to the next
screen to check the membrane switches.

This test checks the membrane switches on
the console pad.

The screen displays  the status of the touch
screen test that was just performed.  The

 Service Mode

diagnostic codes

1...
2...
3...
4...

exit service mode

user interface test

system check

User Interface

Test

exit user

interface test

Touch the four corners and center of the touch

screen in any order.

center

lower

left

lower

right

upper

left

upper

right

User Interface

Test

exit user

interface test

Touch screen test passed.

Press the 6 members switches in any order.

home

favorites

back

help

start/pause

off

Содержание 1999 Sloped-Front







































































































Отзывы: