Maytag Commercial MHN33PD, Руководство по установке

Страница: 5 / 20

5
Alternate Parts
Your installation may require additional parts. If you are
interested in purchasing one of the items listed here, contact
your authorized Maytag distributor.
If you have You will need to buy
Laundry tub or standpipe
taller than 2.4 m (96")
Sump pump system (if not already
available)
Overhead sewer Standard 76 L (20 gal.), 762 mm
(30") tall drain tub or utility sink and
sump pump (available from local
plumbing suppliers)
If you have You will need to buy
Floor drain Siphon break, Part Number
285834; additional drain hose,
Part Number 8318155; and
connector kit, Part Number 285835
Drain hose too short 1.2 m (4 ft) drain hose extension
kit, Part Number 285863
Options
Pedestal
You have the option of purchasing pedestals separately for this
washer. The pedestal will add to the total height of the washer.
Optional pedestal
Pedestal
Height
Approximate
height with washer
Color Part Number
73 mm (2
7
⁄
8
") 1207 mm (47.5") White WHP0400VW
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
■
Pliers (that open to
39.5 mm [1
9
⁄
16
"])
■
Flashlight (optional)
Tools needed for installation
■
Open end wrenches 13 mm
(1/2") and 14 mm (9/16")
■
TORX T20 Security
screwdriver
■
6.3 mm (1/4") nut driver
Parts supplied
■
Level
■
Wood block
■
Ruler or measuring tape
INSTALLATION REQUIREMENTS
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
E. Removable tie strap
F. Drain hose
G. Hose clamp
TORX and T20 are trademarks of Acument Intellectual Properties, LLC.
A B
F
G
C
D E
Specifications
These units are sold in multiple regions with different
requirements for measuring capacity. Below are a few
of the valid forms of measure posted on this product:
Dry Linen Capacity: A weight measure that reflects a minimum
threshold for dry volume capacity that is needed for import tariff
purposes.
IEC Capacity:
The capacity measure that represents the
maximum capacity of dry linens and textiles which the
manufacturer declares can be treated in a specific cycle.
Dry Linen Capacity
10.5 kg (23 lb)
IEC Capacity
8.5 kg (19 lb)
Sound Level
Lpa: 58 dB(A) (Kpa+/-10 dB(A))
Parts supplied for PD Models:
Service door lock cam
Parts supplied for PR Models:
Card reader bezel Screws (2)