Installation and Operational Instructions for
ROBA
®
-brake-checker DC Type 058.600.2
(B.0586002.EN)
your reliable partner
28/06/2019 TF/GF
Page 3 of 10
Chr. Mayr GmbH + Co. KG
Eichenstraße 1, D-87665 Mauerstetten, Germany
Tel.: +49 8341 804-0, Fax: +49 8341 804-421
www.mayr.com
, E-Mail:
33
Application
ROBA
®
-brake-checker DC monitoring modules are used to
supply permitted ROBA
®
-stop safety brakes.
Motion monitoring of the armature disk for released ROBA-
stop
®
safety brakes is possible.
Monitoring module ROBA
®
-brake-checker DC
• Fast or slow disconnection
• Preventative function monitoring (wear recognition and
error recognition, functional reserve)
• Armature disk motion recognition
(release and drop-out
recognition)
• Continuous drop-out recognition
• Maximum output current I
RMS
= 10 A
• Maximum overexcitation current I
O
= 16 A
• Safe monitoring of the switching times (optional)
• Electrical isolation on the output channels
Function
The ROBA
®
-brake-checker DC monitoring module is inten-
ded for use with an input voltage of up to 50 VDC. The
monitoring module monitors the movement of the armature
disk and emits the determined switching condition via con-
trol terminal (signal output).
Critical conditions (line breakages, wear, excess temperatu-
re) can be recognised and the respective signal can be emit-
ted via control terminal (error output).
The movement detection feature of the armature disk is
based on the detection of electromagnetic changes in
the brake. If, due to unfavourable external influences, the
secured detection cannot be ensured, it is possible that the
signal and error outputs do not correspond to the expected
state (plausibility).
Dimensions
(mm)
The use of the ROBA
®
-brake-checker in combination with brakes of other manufacturers is not intended and
expressly not approved by mayr
®
power transmission.
In these cases, operation is at your own risk,
the guarantee and service and support provided by mayr
®
power transmission no longer apply.
66
48.4
61
89.4
31.5
19.3
36.5
22.8
6
42.3
96
Ø3
Ø3.5
The UL information applies only when the UL mark is
printed onto the product label
.
33
