3
FITTING INSTRUCTIONS
Recommended 2 person assembly.
•
Open the suncanopy and carefully insert either the 4mm or 6mm beading strip into the
full length of the awning channel on your vehicle.
•
Pre assemble each steel leg in order 1 to 5 according to the pre labelled components.
•
Draw out the canopy away from the vehicle and insert a steel leg pole into the middle
eyelet. Slide a plastic cap over the top spike to hold the Canopy in place during windy
conditions. Peg the foot into the ground with 2 pegs. Loosely secure the middle leg with
a guy rope and peg.
•
Repeat the process for the 2 outside leg poles. The Sun Canopy should now support
itself as show below:
•
Assemble the 2 fibreglass roof poles.
•
From the front corner of the Sun Canopy, insert a roof pole through the roof sleeves.
Then ensure it is securely fixed into both corner pockets as shown below:
