REV. 05092016
INSTALLATION AND CARE GUIDE
www.maykke.com
INSTALLATION AND CARE GUIDE
INSTALLATION (continued)
3
Mounting the wall vanity
(see fig 3 & 4)
Before attaching the vanity to the wall make sure
the vanity is clear of any plumbing. Modifications
may be needed due to different plumbing. It
is recommended that you discuss this with a
professional before attempting to install the vanity.
□
Attach the mounting brackets to the back of
the vanity by lining up the pre-drilled holes
and brackets.
□
Secure the mounting brackets to the back of
the vanity.
□
Position the wall vanity to the wall cleat on
the wall and let it rest into the cleat
4
Leveling vanity
□
Verify the vanity is level and back rail is flush
against the wall.
3
2
Installing support for vanity
(see fig 2)
Provide 2x6 backing material behind the finished wall to properly
support the vanity.
□
Extend the backing material beyond the width of the
vanity to the nearest stud. This will ensure proper support
for the vanity.
□
Front-notch the studs to ensure the 2x6 backing material
is flush against the studs.
□
Secure the 2x6 backing material to the studs with framing
nails.
□
Rough-in the water supply and drain lines into the rough-
in plumbing areas of the vanity.
2”x6” back
ing mat
erial
Fig 2
Fig 3
Fig 4
由
Au
tod
es
k
教
育
版
产
品
制
作
由
Au
to
de
sk
教育
版产
品制
作
由
Au
tod
esk
教
育
版
产
品
制
作
由
Autodesk
教育版产品制作
由
Au
to
de
sk
教
育
版
产
品
制
作
由
Aut
ode
sk
教育
版产
品制
作
由
Au
to
de
sk
教
育
版
产
品
制
作
由
Autodesk
教育版产品制作
