Maykke YSA1001801, Инструкция по установке, эксплуатации и гарантии

Страница: 8 / 13

REV. 05092016 INSTALLATION AND CARE GUIDE
www.maykke.com
INSTALLATION AND CARE GUIDE
INSTALLATION (continued)
4
Installing the faucet to the vanity top
Follow the manufacturer's instructions to install the
faucet and drain assembly to the vanity top.
6
Securing the vanity top
(If installing Maykke vanity top)
(see fig 4)
□ Place the vanity top (C) with the sink (D) over
the vanity (A).
□ Make sure the wall is straight and there are no
gaps between the wall and vanity top (C).
□
Remove the top (C) and apply a small bead
of silicone compound to the top of the vanity
before the vanity top is set into position.
□ Firmly press the vanity top (C) into position;
check the level and evenness across the front
of the vanity (A), and make sure the vanity
top (C) is flush to the wall.
□ Apply silicone compound to the back and
bottom of the backsplash (B). Firmly press
the backsplash (B) to the vanity top (C) to set
into place, then firmly press the backsplash
(B) to the wall.
7
Reconnecting the water supply
□ For vanities with shelves only: Install the 4
round pegs (BB) into the pre-drilled holes
inside the vanity and slide the wooden shelf
over the round pegs (BB). (see fig 5)
□ Reconnect the faucet supply lines to the water
supply and reconnect the p-trap.
□ Install the drain.
□
Turn on the water supply or the home’s main
water supply and test for leaks.
D
A
C
B
5
Installing the Sink to the top
(If installing Maykke sink)
□ Apply a small bead of silicone compound around the sink
cut out on the vanity top (C), position the sink (D) on the
top (C), pressing firmly together.
□
Secure the sink (D) to the top (C) with the screws.
Fig 4
Fig 5
4