REV. 09272018
INSTALLATION GUIDE
www.maykke.com
INSTALLATION GUIDE
Step 2 :
Attach flexible water supply line to the inlet
of the fill valve and hand tighten only.
At
this point, DO NOT connect to the water
shut-off valve.
See Figure 2.
Figure 2.
Step 3 :
Place a new wax ring around the waste
flange of toilet bowl.
See Figure 3.
Figure 3.
Step 4 :
See Figure 4.
Lower the toilet onto the closet bolts, so
the bolts project through mounting holes
in base of toilet. Using a rocking motion,
press the bowl down to position the toilet
onto the flange.
Figure 4.
Step 5 :
Remove the ceramic bolt cover. Alternately
tighten nuts until toilet is firmly seated on
floor. Adhere the bolt cover to toilet by
using hook and loop fasteners.
See Figure 5.
Figure 5.
3