REV.10232017
INSTALLATION GUIDE
www.maykke.com
INSTALLATION GUIDE
1. Remove the locknuts from all faucet trim pieces.
(If your model has the diverter built into the spout, you
will need to unscrew the diverter from the back of the
spout before proceeding)
2. Insert the faucet components through the mounting
holes and tighten the nuts. Making sure the cold valve is
on the right, hot valve is on the left. (replace the diverter
from step one)
3. Connect the supply lines, using plumber’s tape, to both
the hot and cold valve connectors, then to the main
faucet connector.
H
C
H
C
