Installation Instructions
2 |
P a g e
v 1 . 0 ( 0 6 / 2 0 2 0 )
Installation Directions
1. Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.
2. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material.
3. Remove the shade (B) from the luminaire (E) by twisting it anti-clockwise.
4. Use the suction cup (C) to help install a globe (D - not included) into the lamp holder. Do not exceed the maximum
wattage rating.
NOTE: This luminaire must be used with LED lamps only.
5. Install the shade back (B) onto the luminaire (E) and secure by twisting it clockwise.
6. Install the spike (A) to the bottom of the luminaire (E).
7. Select a suitable location for installation, see the installation requirements on page 1. Ensure there is adequate
space for the luminaire and wiring.
8. Use the quick connector (F) to connect the luminaire to the Lucci wiring kit (SKU# 220826, 220827 - sold separately).
Ensure the connector is fully tightened.
NOTE: The Lucci wiring kit is rated for Max. 80VA load only
.
9. Connect the Lucci wiring kit (SKU# 220826, 220827
– sold separately) to the Lucci transformer (G - SKU# 220818,
220818, 220829
– sold separately).
NOTE: Do not exceed the load of the Lucci wiring kit and Lucci transformer which are rated
80VA, 28VA and 10VA load respectively
10. Insert the Lucci transformer plug (G - not included) into mains power socket outlet (not included) and ensure it is
fully plugged in.
11. Switch on the luminaire to test all the lighting functions and enjoy your new luminaire.