Installation Instructions
2 |
P a g e
v 1 . 1 ( 0 7 / 2 0 2 0 )
Installation Directions
1. Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.
2. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material.
3. Use the luminaire (C) as a template to mark the screw positions on the wall.
4. Use the quick connector (B) to connect the luminaire to the Lucci wiring kit (SKU# 220826, 220827 - sold
separately). Ensure the connector is fully tightened.
NOTE: The Lucci wiring kit is rated for Max. 80VA load only.
5. Connect the Lucci wiring kit (SKU# 220826, 220827
– sold separately) to the Lucci transformer (SKU# 220818,
220818, 220829
– sold separately).
NOTE: Do not exceed the load of the Lucci wiring kit and Lucci transformer which are rated
80VA, 28VA and 10VA load respectively.
6. Install the luminaire (C) onto the wall by using appropriately sized mounting screws (D) and anchors (A). Ensure the
mounting screws (D) and anchors (A) used are suitable for the mounting surface and the surrounding environment.
NOTE: A non-corrosive bead of silicon MUST be applied before installation onto the wall,
ensuring that no water can run down into the cabling.
7. Insert the Lucci transformer plug (not included) into mains power socket outlet (not included) and ensure it is fully
plugged in. Switch on the luminaire to test all the lighting functions and enjoy your new luminaire.