Maycom MH-430, Руководство пользователя

Страница: 9 / 27

Display of Channel(RX/TX Channel)
The last 2 small segments will show memoried channel number
and balance 7 big segments will also show RX/TX channel
number.
2. Channel Down()/TS Button
1) Channel Down() button
Press the "" button to arrow to move to a lower Channel than
is currently shown on the LCD.
2) TS(TONE Number Selection) Button
Press "FUNC + DOWN(TS)" button in the receiving mode(not Scan
/Dual Watch Mode). If the CTCSS option Board is installed in the
set, you can enter the Channel RX/TX setting mode. If not,
the error beep tone will sound.
Display of CTCSS RX Tone setting mode
In the above condition, press the "FUNC + or " button to
enter the TX Tone setting mode.
Display of CTCSS TX Tone setting mode
10