MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Руководство оператора

Страница: 140 / 319

140
Navigation – Front Cabin
During route guidance
Points 1, 2 and 3 refer to the stopover
destination. You'll only see the details
for the final destination when you arrive
at your stopover and the system has cal-
culated the route to the main destina-
tion.
Selectable soft keys:
Route
soft key:
Allows access to the display of the
route on the map (
page 140).
Mode
soft key:
Allows access to the setting of the
route mode (
page 115).
In the Info menu ( page 139), press
the
Route
soft key.
The map appears. The remaining
route section is highlighted in blue
color.
The destination is marked with a flag
, any stopover destination is
marked with a flag . The current
vehicle location is identified by sym-
bol
.
Depending on the distance to the
destination, it may take some time
before the route display appears.
In the Info menu ( page 139), press
the
Route
soft key.
The route appears on the map.
Press the
List
soft key.
The list of remaining road/route sec-
tions appears.
The road currently travelled on ap-
pears at the top.
Press

or

to scroll through the
list.
The
Page
soft keys allow scrolling
through the list page by page.
i
The estimated time of arrival does
not refer to the time zone of destina-
tion, but always refers to the time
zone of the vehicle's current location.
For a correct calculation, make sure
that the system clock is set correctly.
Displaying the route on the map
s
Displaying the route list