Stand 42-1014
Deutsch /
English
/ Français
page 9 of 22
Assembly: Opening the parasol
1. Remove the yellow strap from the canopy.
2. Plug the hand crank (art. no. 207525) into the gearbox bore. During first time of opening you may have
to push the spokes outward.
If the hand crank is not fully inserted, it will wear and not release the gear brake.
• Always insert the hand crank right up to the limit stop.
• During cranking always also push a bit to make sure the crank / drill bit stays right up to the
limit stop.
3. Fully open the parasol (c.f. illustration) by turning it clockwise as far as the limit stop. The parasol will
not be fully taut until the stop screw is well settled on the plastic ring.
A falling parasol can cause serious or even fatal injury.
If the parasol is not firmly anchored in the anchor tube, it may be lifted by the wind.
• Make sure all screws of the anchor tube have been tightened firmly.
Caution
Gefahr
stop screw on the plastic ring
