Stand 42-1014
Assembly: Tools and aids
This chapter helps the technician to get optimally prepared. Use the following checklist to guarantee a
smooth and professional assembly. All items required are listed below.
Depending on individual circumstances it may be helpful to have your regular tools and aids available as
well.
Assembly:
• 8 mm and 14 mm hexagon key (Allen key, supplied with the delivery)
• strong cardboard 230 x 230 x max. 2mm thickness
• screwdriver, middle size
• MAY- setup aid (article no. 352040) or a chair
• soft mat / carpet
• MAY protective gloves (supplied)
• torque wrench, 20 Nm, 160 Nm (stainless steel) and 210 Nm (steel),
suitable hexagon key, 8 mm and 14 mm
• extension for a 14 mm hexagon key, minimum length 25 cm
• flat wrench 17 mm
• free-standing double ladder with minimum 4 steps
Only for parasol model Ø 6 m, 12 – segments:
• cordless drill (charged, with spare battery if possible)
• T 30 bit, suitable for the cordless drill
Only in case of theft lock:
• cordless drill (charged, with spare battery if possible)
• centre punch and 200 g hammer
• spiral drill, sizes Ø 5 mm, Ø 8 mm, Ø 11 mm and Ø 12.5 mm
Cleaning:
• broom suitable for cobblestone
• dustpan and brush
• cleansing cloth and CleanoMay (cleaner, article no. 350848) for aluminium mast
(important in case of rain)
• do not use thinner for cleaning
• bear in mind that the packaging must be disposed after assembly
Deutsch /
English
/ Français
page 21 of 22
