status 34-2256
English
page 8 of 12
4.
Lock the parasol by tightening the clamp in the upper tube.
Theft and anti-twisting locks
Note that the umbrella can no longer be rotated after installation of the safety locks.
1.
Turn the parasol to the position required. (cf. heading “Rotating the parasol round its
main axis”).
2.
A bore hole for the anti-twisting lock has already been drilled into the anchor tube delivered.
Use this as a master / guide hole. Use a centre punch and hammer to punch the main axes.
This light punch makes sure the drill keeps its centrical position during drilling.
3.
Now drill the bore hole for the theft and anti-twisting locks. Use a Ø 12.5 mm twist drill. In
order to reduce the strain, it is helpful to start with a smaller diameter and to increase step
by step up to 12.5 mm. We recommend to use a Ø 5 mm, Ø 8 mm und Ø 11 mm drill.
4.
Slip the bolt through the holes and mount the lock.