background image

15

ENG

Cockpit

INSTANT INCLINE KEYS

The treadmill cockpit has 4 quick selection keys for inclination

With these direct selection keys, you can quickly and easily select certain pre-set incline levels. These cannot 

be changed by the user.

INSTANT SPEED KEYS

The treadmill cockpit has 4 quick selection keys for speed.

With these direct selection keys, you can quickly and easily select certain pre-set speed levels. These cannot be 

changed by the user.

INCLINE 

With keys you can adjust the incline from level 0 to 15 in single step increments.

 = incline increased

 = incline decreased

SPEED +/-

With keys +/- you can adjust the speed in 0.1 km/h levels.

+ = speed increased 

- = speed decreased

START Key

Start the Quick Start function or the training program selected. 

Pause Function:

During training the treadmill will stop by pressing the START key once. The cockpit will switch into pause mode 

for 5 minutes. If the START key is pressed within these five minutes, training will continue from where it stopped. 

After the five-minute break, the cockpit will automatically reset, and all values will be set back to zero. If the 

pause function is used, training can be continued by re-pressing the START key.

STOP Key

Press the STOP/RESET key once and the treadmill belt will stop. If the STOP key is pressed twice, this will set 

all values back to zero.

ECO Key (E)

If you press this during training the current incline will increase by 3 levels. If you press it again the incline will 

reduce again by 3 levels.

Further Functions

Hand Pulse Sensors

Serve for short-term pulse measurement. Hold the hand sensors in both hands. After a short time, the current 

pulse rate will be shown in the display. Please also read the section “Pulse Monitoring using Hand Sensors” and 

“Warning about Pulse and Heart Rate Measurements” in this manual. 

Heart Rate Receiver

The treadmill cockpit is fitted as standard with a receiver for wireless heart rate monitoring. This requires a 

transmitter chest belt which is not included in delivery. The chest belt must transmit at 5KHz frequency and be 

uncoded. Use of a Bluetooth chest belt is not possible. Please also read the section “Heart Rate Monitoring 

using a Chest Belt” and “Warning about Pulse and Heart Rate Measurements” in this manual. 

Содержание RunMAXX 9.1































Отзывы: