Key
Description
Display
8
1. Mains Connection
Fuse T5AL
250V
Remote Control
Connection
ON/OFF
Mains Cable Connection
Connect the mains cable to the connection on the massage chair.
Then connect the mains plug on the mains cable to a power socket.
CAUTION:
The massage chair may only be connected with the mains cable included in delivery to a power socket individu-
ally grounded with a 16A fuse and which has been installed by a professional electrician.
2. How to Start a Massage
2.1
Switch the massage chair on at the main switch. The mains switch is located directly next to the mains
cable connection (see Fig. above).
2.2
Activate the ON/OFF key on the remote control.
2.3
The massage chair will automatically do a body scan. Here the massage chair determines the shape of the
body, the optimum height of the neck / shoulder massage and the acupressure points.
2.4
If the height for the neck / shoulder massage determined by the massage chair is different to the actual
height of your shoulder/neck, then this can be adjusted by pressing the „UP“ and „DOWN“ keys. There are
10 different height levels here to choose from. If you do not change the adjustment within 10 seconds, the
massage chair will use the neck / shoulder position determined in the body scan for the massage.
Operation
During the body scan the symbol for neck / shoulder will be shown in the display and an acoustic signal will
be sounded. You can skip the body scan immediately when it starts by skipping directly to Step 2.5.
2.5
To start with a massage, select one of the 6 pre-set massage programs by pressing the program key.
Move the massage balls upward to a suitable position
Move the massage balls downward to a suitable position
Shoulder position too high
Optimum shoulder position
Shoulder position too low
Shoulder/Neck
Adjustment
